HONGYANG GROUP Australia Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Australia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U202-A Power board

U202-A

U202-A Power board

Features :

Lighting-proof design

Linear powder design, the high and low voltage isolated

Weight:280g

100% Factory Tested.

products links

links

technical archives

    Exploded drawing of double flux solenoid valve From above diagrams, it is known that this kind of solenoid valve consists mainly of valve body, membrane, cone-shaped spring, valve cover, pilot valve, control valve of small flux, reposition valve, winding of pilot valve and small flux valve winding. The working principle of double flux solenoid valve can be leaned from Diagram 2-35. Pilot valve, small flux valve and main v fuel dispenser alve controlled by membrane are closed after power cut, no oil pass solenoid valve. When both two windings are open, pilot valve and small flux valve switch on, pressured oil pushing down membrane. Part of oil in A chamber flow toward outlet of solenoid valve via pilot val fuel dispenser ve and small flux valve, main valve is switched on after overcoming spring, at this state, solenoid valve is in large flux. When winding of pilot valve is cut power, pilot valve is closed, membrane go upward so as to close main valve due to oil pressure increase in A chamber. Solenoid valve is in small flux state. If the power of winding of small flux valve is cut off, small flux valve is closed, no flux in solenoid valve. It is learned from above introduction that the large and small flux of solenoid valve are controlled by pilot valve and small flux valve. This is why it called double flux solenoid valve. As filing motor, pilot valve, small flux valve and main valve are switched on, fuel dispenser work in large flux state. When filling volume nearly reach presetting value, winding power of pilot valve is cut off, main valve is closed. However, small flux valve is still working. When filling volume reach preset-value, the winding power of small flux valve is cut off, solenoid valve is closed. Filling operation is end. Troubleshooting In filing operation some troubles maybe correlate to solenoid valve, some may fuel dispenser be to other hydraulic components. Small flux or no delivery in fuel dispenser, for example, it is possible caused by solenoid valve or other components. Therefore, it is need to give concrete analysis and diagno

technical specification

    results if sent  processed.  Tx completed Acknowledge Advice   1430 Reversal Advice Response   from issueracquirer   The same rules on re-tries apply to a 1420 Reversal Advice fuel dispenser that is reversing an 1100   Authorisation Request as for any other transaction. Though no customer billing takes   place as a result of the 1100 funds are reserved and best practice dictates that every   effort should be made to free up those fuel dispenser funds.   In this scenario it is possible that the 1110 Authorisation Request Response will be   received by the POS. In this case the scripts may or may not be processed. If processed   the issuer will be informed of this through the 1420 advice.   The customer cannot abort the transaction once the pump is enabled.. However the   customer can put the nozzle back to complete the transaction without taking any petrol so   it is possible to have a zero value 1220 Financial Advice. A 1220 must be delivered. In   this instance it is assumed that the transaction will be forwarded to the issuer in order that   the authorised funds are reset and within this message the results of the script processing   will be known.   Wednesday 10 May 2006 - Revision 03   Document title   IFSF POS to FEP Interface   Section Page   EMV 98178   7.1.3 Online Indoor Sa fuel dispenser le Message Flow   This section has two options (two or four message) depending on the acquirer or scheme   requirements.   Two Message Flow set   Th

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    tes (OAS) both to try to support democracy in Venezuela and to blunt Mr Chávez s efforts to expand his influence. In December Mr Chávez will seek a new six-year term in an election in which the fractious opposition has managed to unite behind a single candidate. Venezuela s willingness to invite the OAS and the European Union to observe the election will be the “indicator�of its fairness, says Thomas Shannon, the Stat fuel dispenser e Department s top diplomat for Latin America. To the anxiety of some in the Bush administration, Mr Chávez s friend, Daniel Ortega, the Sandinista leader who was a foe of Ronald Reagan in the 1980s, leads the opinion polls for Nicaragua s presidential election next fuel dispenser month. American officials make no secret of their preference for other candidates. But, as they hope to do in Venezuela, they are relying on an OAS observer mission, in the hope that it will neutralise the apparent control of the electoral authority by Mr Ortega and his allies. The main thrust of the administration s policy in the region, according to Mr Shannon, is to work with other countries to consolidate democracy, broaden economic opportunity and fight terrorism and drugs. “The vast majority�of countries “can fit into the category�of partners in this, he says. So far, they include Bolivia under the government of Evo Morales, a socialist president of indigenous descent and another ally of Mr Chávez. “We ve established a good dialogue with them on the important issues,�Mr Shannon says. “Bolivia can either be a South Africa or a Zimbabwe—it s still in the balance and that s why engagement is so important.� Yet when it comes to the things that Latin American countries want from the United States the Bush administration is sometimes a prisoner of Congress. Take Mr Bush s plan for an immigration refor fuel dispenser m combining tighter border security with steps to encourage legal migration. Congress has passed only the first half of that proposal and, with an eye on next month s mid-term electio