U104-B 3-phase Connection

U104-B 3-phase Connection

This type of meter is used to fuel dispensers for measurement of pressurized oil.

Materials:

Body: Aluminum (Spray-Painted)

Package:

Net Weight:

1.7kg/case of 1

Gross Weight: 1.9kg/case of 1

Dimension: 36x15x15cm/case of 1

e hydraulic pulse so as to increase inner discharge of measurement transducer, affecting fuel dispenser’s accuracy. The incorrect pipeline installation makes the whole hydraulic system much unstable --- pressure pulse increases. As higher oil temperature or vacuum pressure, oil viscidity will reduce, affecting measurement transducer in two facets. One is to increase inner leak, the other is to decline the stability of hydraulic system. From above analysis, it is known that high vacuum pressure of pu fuel dispenser mp inlet is not always good for fuel dispenser’s normal operation. One pipe connect to several fuel dispensers Some filling stations, in order to reduce installation cost, adopt one pipe to connect several fuel dispensers, which is very unscientific. In this type of installation there would be broug fuel dispenser ht two facets of troubles: one is that, as some fuel dispensers stop operations, some still work, air would be suck from stopped dispensers so as to affect the accuracy of working fuel dispensers. The other trouble is that if several fuel dispensers work at same time, there would be mutually interfering, increasing flow pulse and inner leakage so as to affect accuracy. 1.2 Pipeline installation in positive pressure Delivery oil through positive pressure refers to in delivery process the inlet of fuel dispenser is positive pressure, which is adopted in the following situations. One is that delivery oil from high position tank, the other situation is tat adopt submersible pump in tank to delivery oil to fuel dispenser. The latter situation is more often. The Article 6.2.6 in GB50156-2002 the Design and Construction of Vehicle Filling station stipulated that if several fuel dispensers adopt same one pipe, each is affected and lead to uneven influx. Therefore, in order to ensure accuracy, the pipeline between fuel dispenser and tank should scientifically design and installation, using as few as elbow, keeping inner wall smooth of pipe. These are beneficial to reduce pressure and electricity loss, and to decl fuel dispenser

transaction 9　　 Enregistrement transaction　　 Compte-rendu denregistrement de Formatage ticket client　　 9　　 transaction 10　　 Impression ticket porteur　　 10　　Note: les actions et informations not es en italique sont optionnelles et d pendent du type de carte.　　 1 fuel dispenser 2.3.2.1. Plafond(s) de distribution　　 Principes:　　 le plafond de distribution est re �?sous forme dun montant dans le message 4 (R ponse　　 ouverture transactionvalidit carte)　　 ce montant peut- 猼re modifi suite ?la demande dautori fuel dispenser sation: le montant re �?dans le　　 message 8 (R ponse dautorisation) remplace le premier.　　All right reserved �? Imprim le 210203 13:02 71138　　 MPA V5.2: SPECIFICATIONS Ref : NT1118R5　　 TECHNIQUES Nb Pages : 138 + 0 PJ　　 de la LIAISON AUTOMATE-MONETIQUE Date :　　POS Department　　 avec les cartes pour lesquelles il existe un plafond comptant et un plafond cr dit les　　 principes ci-dessus sappliquent pour chacun de ces plafonds en fonction du choix　　 effectu par le porteur　　 12.3.2.2. Contr 磍e(s) de codes　　 Principes:　　 les contr 磍es sont initi s par les champs D5012 et D5013 du message 4　　 tous les contr 磍es sont ensuite assur s par la mon tique par linterm diaire de l change　　 des messages 5 et 6　　 fuel dispenser

ight eventually change. © 2006 .  About sponsorship Japan s economy Picking itself up Feb 23rd 2006 | TOKYO From The Economist print edition The recovery is spreading, by and large Get article background IF THE latest figures are to be believed, then last year, Japan (yes, Japan) grew faster, at 2.8%, than any G7 economy except America. And as of the final quarter of the year, it was growing faster than America as w fuel dispenser ell, clocking up a 4.2% growth rate, year-on-year. Japan s GDP figures are notoriously prone to revision, so some of the shine may yet come off last year s performance. What is not in doubt, though, is that Japan s recovery is solid and increasingly broad-based. In the recovery s early stages, rap fuel dispenser id export growth played a crucial part in boosting industrial production and so company profits. After a soft patch early last year, export growth has accelerated again, with demand from China particularly strong. But what is striking now is the recovery in domestic demand. Companies with growing order books are spending on capital goods fixed-capital investment grew at an annualised 7.2% in the last quarter of the year, while the outlook for machinery orders looks buoyant. Companies need to hire more workers. So the availability of jobs continues to grow. For the first time in over a decade, for instance, Japan has as many jobs on offer as there are applicants. Demand for workers is pushing up wages, and that is now clearly being felt in the shops. In the last quarter of 2005, personal consumption jumped sharply, growing at an annualised 3.2%. Department stores in and around Tokyo report brisk winter sales, and the first retail growth in nine years looks set to continue. Confidence is returning to the housing market, too. New housing starts are holding up in the face of heavy winter snows, as well as a confidence-sapping scandal involving faked earthquake-resistance data for condominiums. And afte fuel dispenser