K-GAQ FUEL DISPENSER

K-GAQ FUEL DISPENSER

FlowMeter :Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight :280kg

Dimension(L×W×H) :1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

operate motor. If it still don’t move or slowly run, electric circuit or motor should be inspected. If not the rotor of pump maybe locked. Carefully check and cleanse oil strainer. If failure still exists after the above inspection, over fuel dispenser flow valve should be checkup. In case that valve core jam, shut down incompletely or lose in valve seat the oil in high pressure area overflow into negative fuel dispenser area, resulting in no delivery or inefficient discharge. Taking out valve core and spring so as to clean dirty, inspect valve seat at same time. If valve seat is loose re-fix it through oil-resistant glue or change a new pump. When find scrap of spring and graphite, washing overflow valve is must, changing broken parts if necessary. If found rotor is stuck there would be several reasons related, such as spring broken, long vane, vane segment, lose bolts at top cover, etc. reassembling after overcome these reasons. Some manufacturers adopt new spring material evading broken. The lose match of rotor and axis of pump also result in no delivery or inefficient discharge. This situation will be overcome by changing rotor. After the above check and examine still find any rotor stuck or overflow valve abnormal, it is suggestive that vane abrasion is extensive, broken and spring damaged. Much abrasive vane can not successfully segment high and low pressure area, resulting no delivery or inefficient discharge as the areas exchange. The broken vane or spring not only cause flow trouble but also increase noise as whole. Furthermore, if they flow into other inner components may result in new failure. The solution fuel dispenser to this is to change new vane or spring and clean out broken piece. It is suggestive that change all vanes if fuel dispenser have operated long time. Changing a new pump overcomes too large abrasion between frame and rotor. To check whether a leakage occurred in pine between fuel dispenser and tank, different diameter of pipe connection, bottom valve stuck or leakage. Abnormal noise and vibration The reason of

　　 event.　　 00H Authorisation after Nozzle up event　　 01H Authorisation prior to Nozzle up event　　 2 Bin fuel dispenser 8 R( ) M　　 Nozzle_Juggling_Disabled　　 Used to indicate whether the site configuration (Trading standards fuel dispenser or　　 (02H) (0-1) W(1 2 100)　　 Petroleum Officer) supports authorised state after the Release command　　 Default is 00H i.e. Authorised state allowed after Release command.　　 00H Nozzle Juggling enabled　　 01H Nozzle Juggling disabled　　3.7 Controller Device Main Device Others　　 These databases provide access to the Controller Device attributes that relate to other devices. There will be a database for　　 each different device type.　　 The database address CDMD_ID will be the same as the Subnet value for that device as defined in Engineering Bulletin　　 Number 8 (Subnet Addresses of IFSF Devices) and are as follows:　　 Dispenser 01H　　 Price Pole 08H　　 Tank Level Gauge 09H　　 Car Wash 0AH and so on.　　 CONTROLLER DEVICE MAIN DEVICE OTHER DATABASE　　 DB_Ad = CD_ID (01H) + CDMD_ID (02H 1FH)　　Data_Id fuel dispenser Field Type ReadWrite in MO　　 Data Element Name　　 Description State　　3.8 Controller Device Error Codes　　 This data allows the CD to handle the error

higher rates should go and how to explain their thinking to financial markets. Stop too soon and inflation, already close to the top of the Fed s informal comfort zone, could become a problem. Raise rates too far or fail to make the strate fuel dispenser gy clear, and the consequences for America s unbalanced, debt-laden economy could be calamitous. On March 27th Mr Bernanke will chair his first two-day fuel dispenser meeting of the Federal Open Market Committee (FOMC), the central bank s rate-setting body. Financial markets believe that another quarter-point rise is almost inevitable. Less obvious is how the change in the leadership and composition of the FOMC (which consists of the Fed s board of governors and the presidents of regional Federal Reserve Banks, not all of whom vote) will influence monetary policy thereafter. Comings and goings Though Mr Bernanke s arrival is the most important, it is not the committee s only change. Roger Ferguson, vice- chairman since 1997, is leaving and will not take part next week. Nor will a non-voting member, Anthony Santomero, departing president of the Federal Reserve Bank of Philadelphia. Two new governors, recently appointed by George Bush, will make their debuts Randy Kroszner, a respected economist from the University of Chicago and former member of Mr Bush s Council of Economic Advisers, and Kevin Warsh, a young White House aide. Those prone to worry have pointed out that the board is short of expertise in monetary policy. Mr Bernanke and Don Kohn, an experienced central banker, are the only members with backgrounds in the field. Mr Kroszner is an able a fuel dispenser cademic, but his specialities are banking and financial regulation. Much more alarming, Mr Warsh is seen as a shockingly lightweight appointment. This may not matter much. Mr Bernanke has a stronger academic background than any of his predecessors. Several of the regional Fed presidents are able macroeconomists, notably Janet Yellen of the Federal Reserve Bank of San Francisco. Taken as a whole, the FOMC has the