HONGYANG GROUP Australia Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Australia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

K-G22 FUEL DISPENSER

K-G22

K-G22 FUEL DISPENSER

Pump : Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :ype LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

products links

links

technical archives

    the product vary largely and different performance and failure as well. The following just introduce some general methods to solve troubles. 3.1. Inefficient performance The bad separate capacity present as: large foam appears in oil indicator as refueling, accuracy is affected. Maintenance methods and procedure as followed. Firstly to check the nut and plug on strainer whether loose, whether leakage at joint face as stopping operation. If failure is still exists after solve the sealing problem of strainer cover, conduct next progress. Check whether pipeline leakage between tank and fuel dispensers. The check method is to disconnect the end cover of strainer, and to find whether exist oil in low pressure chamber; if no oil or oil level go down slowly, there is some leaking places in pipeline or bottom valve. Inspect exhausting valve seat. Open upper cover and fuel dispenser inspect the small hole at exhausting valve seat whether stuck. If the hole is stuck or narrowed by waste, oil indicator would appear much foam due to air leaking into vapor separate chamber. The method to solve trouble is that dredge hole and clean groove, making enough area. Note that the area should don’t too large, large room easily causes leaking oil at exhausting pipe. Check vapor separate chamber. Under normal condition oil level in the chamber should keep a half capacity so that ensure air can’t reach into low pressure chamber. (Different products with various oil level). If there is no oil or low level in vapor separate chamber, the taper valve would not plug the hole of return oil valve seat, so as air reaching into low pressure chamber via taper valve and returned oil valve. The solution is that inspecting the axis of returned valve and the hole of returned oil valve seat. Reassembling them after solve problems. 3.2. Exhaust pipe leakage fuel dispenser When tank position is higher than that of fuel dispenser, exhausting pipe will leak oil. Plugging exhausting pipe could solve leakage phenomenon. If found leakage on tank the following procedure fuel dispenser

technical specification

    Description   bin8 1 to 255 Logical Node Address Recipient   LNAR S   bin8 1 to 127   N   bin8 1 to 255 Logical Node Address Originator   LNAO S   bin8 1 to 127   N   bin8 0 Message Code   IFSF_MC   - the IFSF_MC is 0 for application messages   bin8 001xxxxx Message Status   M_St   - the message type is ANSWER   (bit map)   - the token (xxxxx) is the same as t fuel dispenser he token   generated by the originator of the READ-   message   bin16 Message Length   M_Lg   - the number of bytes in the ANSWER-   message following   bin8 1 to 8 Database Address Length   DB_Ad_Lg   - the number of address bytes which are used   to specify from where the data has come   x bin8 Database Address   DB_Ad   - the database address from where the data   (x = 1 to 8)   fuel dispenser has come   bin8 1 to 255 Data Identifier   Data_Id   fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    st 4% against the dollar this year. While fending off calls for her impeachment and rounding up alleged coup-plotters, Ms Arroyo s government has also been improving its tax-gathering, while expat Filipinos have been sending home bumper remittances—a record $12.3 billion last year. The Philippines central bank says that the peso floats freely and it will intervene only to smooth volatility. However, Thailand s and Malaysia s central banks have been buying dollars to slow the rises in the baht and ringgit. Since Malaysia moved to a “managed float�on the same day as China revalued the yuan last July, the ringgit, like the yuan, has not been allowed to rise too far. But this has only fuelled speculation that Malaysia will follow any further Chinese moves upwards, an expectation that has affected other currencies. Indonesia s rupiah, which was sliding ear fuel dispenser lier this year, has bounced back to around its highest since late 2004. Indonesian businesses are pressing the government to stop it going further. While some of its neighbours have been raising interest rates to control inflation and keep pace with the Fed, Indonesia is in easing mode, aiming to boost economic growth. Its bonds yield around 12%, among Asia s highest, giving it room to cut rates without deterring investors. Though the Singapore dollar is close to its highest for seven years, some analysts expect the city-state s central bank to raise the ceiling on the currency s (unpublished) trading band soon, to counter the inflationary effects of high oil prices and a tight labour market. Up to a point, the firmness of South-East Asia s currencies is helpful it holds inflation down at a time when the subsidy cuts are causing popular unrest. But you can have too much of a good thing. If currencies become too dear, they could damage the re fuel dispenser gion s export-dependent economies. Masahiro Kawai, an official at the Asian Development Bank, this week urged the region to prepare for a slump in the dollar, the probability of which he compa fuel dispenser